Mira Advance Flex Low Pressure 9.0kw

Mira Advance Flex Low Pressure 9.0kw
Mira Advance Flex Low Pressure 9.0kwMira Advance Flex Low Pressure 9.0kwMira Advance Flex Low Pressure 9.0kwMira Advance Flex Low Pressure 9.0kw

Free Next Day UK wide delivery

See Delivery tab below for terms and cut off times


Our Price:  £389.00(Exc. 20% VAT)(£466.80 Inc. VAT)



Part Number:  MIRAFLEX/LP90 (S8050209)
Brand:  Mira Showers



Relief Available 

see VAT Exemption form for details

9.0kW Code: MIRAFLEX/LP90.

Guaranteed for 2 years

Mira Advance Flex Low Pressure 9.0kw

Ultimate in safety and usability, even at low pressure. With an inclusive design suitable for use by everyone, featuring an integral pump for best in class performance at low pressure.

Pumped electric shower - the ideal choice for low-pressure sites. Separate flow and temperature controls with push button start/stop and audible beeps. Thermostatic temperature control for added safety. Extended riser rail (1m) with easy one-handed adjustment of the height of the shower head, plus additional parking socket

Guaranteed for 2 years



​Simple settings
On/off push button for ease of use, with select and forget function. Shower on demand. Helpful, assisted showering. Tactile raised areas with large on/off backlit button and audible beep to aid user navigation.

Safer showering

Safer showering with thermostatic temperature control and adjustable temperature limit, allowing the user to choose from 8 maximum temperature settings.

Ultimate flexibility

Easy to use slide bar and friction bracket which can be adjusted with one hand. Consistent showering performance. Even more advanced than our Mira. Clearscale™ technology which reduces the build-up of limescale by up to 50%, this anti-limescale technology is best in class.

Greater coverage
4 spray showerhead for greater experience and rub-clean nozzles for easy cleaning.



Temperature control
Control type: Thermostatic (electronic)
Adjustable maximum temperature for on-site conditions
Phased shutdown flushes hot water from the tank to make it safe for the next user
Factory set to safe max temp: Adjustable between 37°C-48°C

Installer Product Features
Supply Voltage: 230v + 10%
Supply rating 40 amp
Terminal block connections: Maximum 16mm²
Water entry points: Right (Rising, falling or rear with an elbow)
Cable entry points: Right (Rising, falling or rear)
Inlet connections: Brass inlet connector. 1/2" BSP Male and 15mm compression fitting
Outlet connections: 1/2" BSP Male

Benefits for your customer
Minimum maintained pressure: 0.008 bar (80mm head)
Maximum maintained pressure: 1.0 bar (10 meter head)
Maximum static pressure: 1.0 bar (10 metre head)

Energy Efficiency Rating:
Class A

Product Approvals
BEAB Care Approved
Energy Efficiency: Class A

Related Products