Sandmartin, Kingfisher & Kite Level Access Shower Tray
Level access, bath replacement, cut to length to suit.
A showering solution where a bathtub is no longer practical, for users with mobility difficulties or requiring wheelchair access.
Re-designed drying area allows for a 1850mm corner shower enclosure
18mm tiling lip can accommodate wallboards or wall tiles. Also used to secure the shower tray to the wall.
Reinforced GRP construction.
Suitable for wooden or solid floor situations. Requires floor excavation of approximately 40mm. The void beneath the shower tray must be filled with a ‘weak’ sand and cement mix.
Cut to length tray, incorporating drying area, can be cut from its original length of 1850mm to fit exactly between three walls into the space left by a bath. End plate supplied to conceal the cut end.
Service pipe ducting available as an optional accessory to overcome pipework or to make the showering area larger.
Anti-slip surface for an assured underfoot grip.
Exclusively incorporates Biomaster antibacterial product protection.
Left or right hand tray options available.
All of these trays can be trimmed to your required size
Sandmartin - 1120mm minimum length
Kingfisher - 1220mm minimum length
Kite - 1295mm minimum length
Supplied as standard with a STW8B-95 50mm
- 95mm in depth
- Flow rate in excess of 26 litres per minute in 15mm head of water
Available Downloads for Sandmartin, Kingfisher & Kite Level Access Shower Tray